CMX-5000                                                              DJM600
 

CMX-5000

Innovative New Functions

Auto Mix Play***

Armed with an original search system, the CMX-5000 measures a track's BPM and beat timing* and then automatically changes the speed to the designated BPM, thereby realizing smooth mixing even for tracks on a single disc that have different tempos.
Three Playback Methods are Available:
 • Track Mode: Performs mixed playback alternating between tracks from discs in both decks.
 • Disc Mode: Performs mixed playback of track on a single disc in numerical order.
 • Program Mode: Performs mixed playback of tracks in any designated order.
Track Playback Time is Adjustable:
 • Short Time Change:Switches the track at a shorter time.
 • Instant Change:Switches the track at the DJ's preferred time.
Versatile Mixing Variation:

The Auto mix function is very effective in the following situations:
 • At times when there no DJ is present in stores, malls, etc. , such as an weekdays non-stop background music can be played in DJ style using the establishment's favorite selections to help creative a more active atmosphere
 • In bars, restaurants or pubs where the staff work as DJs, the Auto Mix function results in considerable labor saving allowing the staff to devote more of their time to customer service.
 • When DJs playing at clubs,etc., need to take a short break to deal with urgent business or emergencies they can use the Auto Mix function to keep the music rolling

*  In case of no beat music, smooth mixing cannot be performed because the BPM or beat timing of certain songs can't be measured correctly.

**In the case of tracks on the same disc, cross fading cannot be performed.

***The CMX-5000, while revolutionary with Auto Beat Mixing capability, does have it's limitions just like any electronic device. There are certain variables, that if present, will cause the Auto Beat Mixing function to not function properly.

A few things must be in order for it to Auto Mix:

Music must be within a ±16% ratio. If it is not within this range, not only will it not mix, but the beats will not match as well. The BPM's will stay the same (even with the BPM sync pressed).
There must be a steady consistent beat in the beginning of the song. A song that starts with just vocals or off beats rhythms will not mix. Any ±16% range BPM should mix if it is has a CONSISTENT beat.
You must wait a few seconds for the next song to cue up, before hitting "Instant Change". The player does have to calculate the beats of the next song. It needs just a few seconds to cue up. You will be know that it ready to go when:
If the next song programmed is on the other side, an orange colored "dash" going in a semi-circle around the display appears.
If the next song programmed is on the SAME player, the auto-cue button quits blinking.
The "Instant Change" button must be pressed IN TIME. If you decide to use the "instant change", it must be done in time for it to auto mix.

DJ Operating Functions
The CMX-5000 incorporates and upgrades the functions of Pioneer's world-renowned DJ-use CD player-the CDJ. 700S/500-II and also boasts a number of brand new functions.

Clear Jog Dial
Although the player is a rack mount component, this design results in a larger jog dial and display which together realize higher operability and easy visual confirmation of the current playback status.

Quick Start
This feature permits virtually instantaneous playback with a time lag of less than 0.01 seconds from the pause condition.

Cue Functions (Cue Point/Back Cue/Auto Cue/Cue Paint Sampler)
Set your own favorite playback points using the above functions. For example, with Auto Cue, you can set the start point of each track automatically.

Tempo Control
The playback speed can be adjusted within three kinds of range. ±6/10/16%.

Master Tempo
With this feature, you can change the playback speed without altering the music's pitch.

Loop Functions (Seamless Loop/Realtime Loop/Loop-Out Adjust/Re loop)
Uninterrupted sound loops can be easily arranged, and with the Re loop function you can return at any time to a previously set loop.

Playing Address
The playing address allows you to check the current track's playback situation visually in paragraph units.

BPM Counter
This counter measures and visually displays the current song's BPM (Beats Per Minute).

Pioneer Gives You More

Legato Link Conversion for High Quality Sound
Equipped with Pioneer's original wide-range technology Legato Link Conversion the CMX-5000 is capable of reproducing sound frequencies above 20kHz which are lost during normal CD format playback.

Vibration-Proof Memory and Construction
The CMX-5000 boasts excellent vibration-resistant characteristics and prevents sound jumps with the double protection afforded by a maximum 8-second vibration proof memory and a special vibration proof construction

Slot In
Thanks to this system, swapping discs is smooth and rapid, and you can say good-bye to worries about damaging the disc tray.

 Mix Out
The CMX-5000 incorporates a Mix Out terminal that allows use even in cases where there is only one input system, the setup is restricted to a single amplifier, or there is no mixer input margin.

Multi-Read
This function plays back not only CD's and CD-R's but also CD-RW discs that are impossible to play on a conventional CD player.

Headphone Monitor
This handy monitor function enables versatile sound monitoring.

Digital Output
The CMX-5000 is equipped with a digital output terminal.

Fader Start Play/Back Cue Play
Using the CMX-5000 together with a Pioneer DJ mixer, you can use the mixer's fade, to control playback operations such as track start and return to cue point.
 

DJM-600











AUTO BPM COUNTER
Equipped with a counter that automatically measures and digitally displays a track's BPM measurement range:

70-139 / 91-180 / 71-180 / Manual

The DJM-600 provides a visual confirmation of a track's tempo to allow the user to merge one song into another smoothly. Also, BPMs of tracks that are difficult to measure can be manually input by tapping on the TAP button.

AUTO BEAT SAMPLER
This is a new DJ function that allows you to sample your favorite sources and play them back easily at the touch of a button. The BPM is measured digitally and recorded automatically exclusively for designated beats

( 1 / 2 / 4 / 8 / 16 ) beats,
Maximum interval: 6 seconds.

If set to the Stand-By mode when no sound is present, the function automatically starts and stops recording in response to the presence and absence of the input signal and achieves the correct sampling with perfect timing. What's more, the user can edit the end position, making possible a wide diversity of playback effects by making use of three playback mode options and the cross fader start.

Sampler info:
Sampling rate: 44.1 kHz
Resolution: 16 bit stereo
A/D converter 20 bit
Sampling time 8 second
 •SINGLE PLAY: Plays back the recorded sound once only when the button is being pressed.

LOOP PLAY: Plays back the recorded sound repeatedly when the button is pressed.

STRETCH LOOP PLAY: Extends or shortens the recorded sound in accordance with the mixed track's BPM and plays back the sound repeatedly.

AUTO BEAT EFFECTOR
Linked to BPM, the DJM-600 can add effects to each CH, MIC and MASTER independently. The user can produce music that makes full use of high-level DJ techniques by performing quick setting with the Beat Unit Switch button, adjusting the precise time parameters, or controlling the balance between the effect sounds and the original sounds by varying the mix ratio. Moreover, even when using the fader, it is possible to leave just the effect sounds without linking to BPM.

DELAY: Repeats a sound once. The user can set the delay to their desired tempo.
ECHO: Repeats a sound several times. The user can set the echo sound to their desired tempo.
AUTO PAN: Automatically shifts the sound to the right and left. Also capable of short auto pan sequences that would be impossible via manual operation.
AUTO TRANS: Periodically cuts the sound.
AUTO FILTER: Periodically varies the sound color.
FLANGER: Periodically reproduces a sound effect resembling a jet airplane ascending and descending.
REVERB: Reproduces a reverberating sound effect.
PITCH SHIFTER: Allows the interval to be freely varied throughout a range of +/-1 octave. With this, the user can compensate for interval changes when using analog turntables or for tempo changes when different makers' CD players are used. Additionally, choruses can be made by employing mix ratios.
EXTERNAL EFFECT INPUT (SEND/RETURN): Allows the user to connect the mixer to an external effector or sampler, etc.

HEADPHONE MONITOR SPLIT
When the Headphone Output switch is set to MONO SPLIT, the right channel becomes the master and the left channel becomes the CH sound. Choosing Plural with the headphone cue, the user can also hear mixed sound. Moreover, this function can perform right and left level adjustment, thereby making monitoring easier.

FADER START PLAY
Connected to the CDJ Series, the DJM-600 can begin playback of a track using the sliding cross fader or the channel fader. It can mix tracks without creating spaces by setting the stand-by track's cue point and performing a single-action cut-in. Since it returns to the cue point via the back fader alone, sampler-style playback is also possible. Start/back play of sources recorded using the built-in sampler is also possible using the cross fader.

EQUALIZERS
The DJM-600 is equipped with a separate HI/MID/LOW 3-band equalizer for each channel. This arrangement allows the stress of the instrument sounds to be adjusted within the range -26dB to +12dBfor an improvement of about 100% (Pioneer comparison) in sound extraction.

OTHER FUNCTIONS

CROSS FADER CURVE: Choose from three types of cross fader start-up option.

TALK OVER: Mutes -14db all levels apart from the microphone.

PEAK LEVEL METER: Allows the user to instantly determine the source input condition for each channel to make possible certain operation without loss time.

TRIM: Track input level composition is available. This function is compatible with diverse sound sources.

INDEPENDENT MONITOR SWITCH:Enables independent or simultaneous monitoring of each CH, MIC, MASTER and EFFECT.

BOOTH MONITOR OUTPUT: Utilizing independent output terminals for booth monitor use, this function allows the sound volume to be independently controlled at the upper surface.

• Recording outputs (RCA) (New)

• All faders, knobs, volume controls, buttons, etc., are made to
professional-grade SS-use high-durability specifications and designed to stand up to hard use.
 
 

 

| Music | Lighting | Dj Gear | Karaoke |
| Employment Opportunities | About Us | Add Email List | Wish List |
| Orders | Luxury Limo Svc | DJC Sound |  

For DJ's Only
200 Ridgewood Rd.
Wilkes-Barre, PA  18702
Phone: 570.823.5988
Fax: 570.208.7032